玻璃纖維織物涂覆硅橡膠布
玻璃纖維織物涂覆硅橡膠制品
公司生產的玻璃纖維織物涂覆硅橡膠布有單面和雙面二種形式。有較高的使用溫度。長期工作溫度為550℃以下，工作壓力為300kpa。短期16小時可承受280℃，有很好的耐候性。單面硅膠布主要用于柔性織物補償器的外層，雙面硅膠布可用于密封層。硅橡膠可做成阻燃型的用于有消防要求的場合。但注意硅橡膠布不能用于含SO2成份的煙氣和水蒸汽的場合。
1、適用范圍
硅橡膠具有優良的耐熱老化，高絕緣性能的耐天侯老化性能的高分子彈性體。經與玻璃纖維涂覆組成復合材料，是一種高性能，多用途的新型復合材料。已被廣泛用于航天、化工、大型發電設備、機械、治金非金屬膨脹節（補償器）等領域。
2、特點
玻璃纖維涂覆硅橡膠制品，有其獨特的耐高溫性、耐透氣性、優異的耐天侯老化性能，和又具有柔軟且韌性的特點，而優于普通的涂層織物。
3、貯存、運輸
在0-40度，相對溫度<75%的環境中貯存，距熱源至少1米以上，并避免與酸堿等對橡膠有害的特質接觸，運輸中，防止擠壓及銳物。
4、產品顏色可分為紅色，銀灰色，黑色，也可根據客戶具體要求生產。
5、包裝方式：50M卷布用蛇皮袋包裝后用PP打包帶固定。
Silicone rubber coated fiberglass fabric products
Company production of silicone rubber coated fiberglass fabric/cloth are two kinds of one-sided and double-sided form. The use of a higher temperature. Long-term temperature below 550 ℃, working pressure 300kpa. Affordable 16-hour short-term 280 ℃, good weatherability. Silica cloth used mainly for single-sided flexible outer fabric compensator, two-sided silicone cloth layer can be used for sealing. Silicone rubber can be made flame retardant requirements for the fire to do so. However, the attention of cloth can not be used for silicone rubber composition of flue gas containing SO2 and water vapor to do so.
1, the scope of application of
Silicone rubber with excellent resistance to heat aging and high insulation properties of the aging-resistant properties of Hou days elastomer polymer. Coated with the composition of glass fiber composites, is a high performance, multi-purpose a new type of composite material. Has been widely used in aerospace, chemical industry, large-scale power generation equipment, machinery, metallurgy of non-metallic expansion joint (compensator) and other fields.
2, the characteristics of
Silicone rubber coated fiberglass products, has its own unique high temperature resistance, air permeability, good aging-resistant Hou-day performance, and also with the characteristics of softness and toughness, and better than ordinary fabrics.
3, storage, transportation
In the 0-40 degrees, relative humidity <75% of the storage environment, away from heat source for at least 1 m above and to avoid, such as rubber and acid-base characteristics of harmful exposure, transportation, and sharp objects to prevent extrusion.
4, the product color can be divided into red, silver, black, can also produce according to customer specific requirements.
5, packaging: 50M roll packing cloth after use package with a fixed PP.